KOSHAUS 106

Energy Efficiency: KfW 40 Standard

Base rating: House meets KfW 40 requirements — ultra-low energy consumption, minimal heating costs.

The transition to the KfW 40 Plus standard is achieved by installing integrated systems (optional):

• Air-source or ground-source heat pump
• Mechanical ventilation with heat recovery (MVHR)
• Photovoltaic (PV) system
• Smart energy management

Passive House standard available as an upgrade.

1. ROOF PANEL 452 mm (WARM CONTOUR), PASSIVE HOUSE STANDARD:

1.2 Crate ventilated, 23 mm
1.3 Counter-lattice ventilated, 50 mm
1.4 Diffusion membrane, 1 mm
1.5 Softwood fiberboard, 50 mm
1.6 Wood fiber insulation, 300 mm
1.7 Frame made of LVL timber, 300 mm
1.8 Vapor barrier, 1 mm
1.9 Oriented strand board, 18 mm
1.10 Frame made of timber, 50 mm
1.11 Wood fiber insulation, 50 mm
1.12 Gypsum particle board, 12 mm
1.13 Interior cladding – natural wood, log profile, 20 mm

2. EXTERIOR WALL 346 mm (WARM CONTOUR), PASSIVE HOUSE STANDARD:

2.2 Counter-lattice ventilated, 50 mm
2.3 Diffusion membrane, 1 mm
2.4 Softwood fiberboard, 50 mm
2.5 Frame made of kiln-dried planed timber, 200 mm
2.6 Wood fiber insulation, 200 mm
2.7 Vapor barrier, 1 mm
2.8 Oriented strand board, 12 mm
2.9 Frame made of timber, 50 mm
2.10 Wood fiber insulation, 50 mm
2.11 Gypsum particle board, 12 mm
2.12 The finish is natural wood – imitation of timber, 20 мм

3. INTERIOR WALL:

3.2 Frame made of kiln-dried planed timber
3.3 Wood fiber insulation
3.4 Gypsum particle board, 12 mm

4. OPTIONAL – FLOOR PANEL 401 mm:

4.2 Soft fiberboard, 50 mm. Option: Underfloor heating
4.3 Moisture-resistant plywood, 21 mm
4.4 Vapor barrier, 1 mm
4.5 Frame made of LVL timber, 300 mm
4.6 Thermal insulation made of wood fiber, 300 mm
4.7 Diffusion membrane, 1 mm
4.8 Cement-bonded particle board, 12 mm
4.9 Special treated beam between the house and the foundation, 50 mm

* The floor panel is used in combination with a pile foundation.
** A reinforced concrete foundation does not require a floor panel.